Special Alumina Bricks are made by high grade of sillimanite,andalusite,mullite, corundum as raw material, It can resist corrosion of molten and corrosion of industrial slag. with high refractoriness, low creep and mechanical behavior under high temperatu
Silica brick is made of silicon as raw material and fired at high temperature. The silicon oxide content is more than 93%. It is used in hot air furnace, coke oven, glass kiln, etc. It has good resistance to acid slag corrosion, and the load softening tem
This ceramic grinder used on the coffee/pepper grinder, which has good corrosion resistance, high operating temperature, good mechanical characteristics, high wear resistance, high hardness, high thermal shock resistance.
Due to its high density, high hardness and excellent radioactive protection ability, tungsten heavy alloy is the best material for radiation shielding, and its machining process is non-toxic.
When its diameters from 0.5mm to 2mm,the cable remains very flexible, when its diameters is from 6mm to above, 6X7+FC steel wire rope become quite rigid.
316 and 316L stainless steel 316 and 317 stainless steel (see the properties of 317 stainless steel below) are molybdenum containing stainless steel. The molybdenum content in 317 stainless steel is slightly superior to 316 stainless steel.
his 6AL4V Titanium Bar contains a certain amount of elements that stabilize the alpha phase, and are mainly composed of the alpha phase in equilibrium.
Extruded aluminum shell is one of the main products of Alu-Plus, extruded aluminum shell processing difficulty is mainly reflected in two points, one is the shell at both ends of the opening tolerance to be consistent, This ensures the normal assembly of
The product is composed of a mask body, a nose clip and a mask band. The whole is made of non-woven fabric and has a three-layer structure. The inner and outer layers of the mask are non-woven fabrics. The middle filter material is melt-blown cloth.
COLO-1517 wheel powder coating spray booth cost effective,suitable for car rims,small volume accessories or batch production applications, ideal for job shops, trade-coaters, start-up operations or to expand existing production.
Manufactured to BS EN124 Class D400Suitable for slow moving heavy trafficDuctile iron for improved weight to strength ratioProduced on horizontal automatic line
The Exhaust Turbo Turbine Elbow Outlet Pipes is applicate for exhaust system, the manufacture process is Sand casting with machining, and material is Nodular Graphite Cast Iron.
Aluminium coil, with its high corrosion resistance, high plasticity and high thermal conductivity, according to its different density and strength, now is widely used for further processing or prepainting
Fiberglass Cloth is made by drawing glass into a very fine glass filament, where the glass filaments have good softness. The glass fiber is spun into a yarn, which can then be woven into a fiberglass cloth by a looms.